1 / 2
Puig CS1 Mini Windshield Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
General
This is a replacement for the original Puig CS1 Mini Windshield mounting bracket. Compared to the original, the new bracket has a deeper slot so you can mount the windshield lower on your headlight.
The original had a very big gap that looks quite ugly.
You will have to tap two M6 holes with a good quality tap.
Print Settings
I would not recommend printing this, cut it from 3mm stainless steel instead.
Please consider liking and posting a make if you find this useful 🙂