Cable blinding cover
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.45 – €3.00 net (excluding VAT)
For file: Cable cover_0.2mm_PETG_MINI_2h56m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.73 excluding VAT (range midpoint).
- Weight reported by the author
- 32 g
- Print time reported by the author
- 2.93 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Blinding cable cover for unused wires
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 185
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is a cable blinding cover for some cables we are currently not planning to use (and have no power connected to them). It is a more elegant solution then just having loose wires all over the place.
The base can be installed with screws or some reusable glue pads, the cover is screwed on top.
Printed in PETG with 0,2mm resolution without supports.