Ubiquiti SFP Wizard Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple protection for the Ubiquiti SFP Wizard
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 62
- Makes
- 0
- Views
- 228
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by NWalen's case this case is designed to protect the Ubiquiti SFP Wizard from daily knocks/transport. Shaped to match the slight narrowing of the SFP Wizard at the top and bottom.
Recess provided for the power switch, which prevents it being turned on when inserting or removing the SFP Wizard, or in transit.
Hole in the main case allows the unit to be pushed out slightly if the fit becomes too tight for some reason. Also finger gaps top/bottom if required.
Cover held on by magnets allowing the cover to be removed either using the slight recess to leverage up or can be sideways easily.
Required:
Filament (PLA works fine)
Qty 8 : 8mm x 3mm magnets (which in reality are just under 3mm thick)
Assembly:
Check magnet fitment, if too loose apply a small dab of glue to secure them.