1 / 5
1,25 eyepiece holder with integrated polarization filter. — image 1
1 / 5

1,25 eyepiece holder with integrated polarization filter.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

1.25" eyepiece adapter with T2 internal thread and 2" external barrel that incorporates a set of polarizing filters.

Rating
0 / 5
Likes
6
Downloads
10
Makes
0
Views
110
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

1,25 eyepiece holder with integrated polarization filter.

Design of a 1.25” eyepiece adapter with T2 internal thread and 2” external barrel. It incorporates a set of 2 polarizing filters, one fixed and the other that can be adjusted from the outside, without the need to remove the eyepiece. Optionally, a third filter (IR-UV, for example) can be added threaded to the fixed polarizing filtre.

I have designed and tested three options:

Option 1 – To mount the double Baader Planetarium filter.

Option 2 – To mount two single Baader Planetarium filter.

Option 3 – To mount Celestron filters (discontinued)

 The option 3, due to the height of the Celestron filters, may allow mounting any other brand of filter.

Post-processing of the printed parts is necessary, eliminating defects and irregularities on the surfaces. Before assembling the set, you will need to make sure that each piece can be assembled and rotates or threads smoothly inside the adapter.

When you mount the filters, you will have to test their position so that they close and open the passage of light correctly.

The adapter includes an internal groove to place a brass clamping ring inside (optional). This ring holds the accessories better without leaving scratches. You can make your own ring with my ring bender:

https://www.printables.com/model/1507483-bending-machine-for-making-brass-rings-for-telesco

It is recommended to print the T2 thread (M42x0.75) with a layer height of less than 0.2 mm. I have tested, with good results, a layer height of 0.15 mm, although it is better to reduce it to 0.10 mm. The rest of the part can be printed with 0.2 mm. See the print settings in the .3mf files.

The threads have a small slot that serves to hide the seam and ensure that it remains without defects. It is convenient to use it if you make your own laminate.

With a quality filament (PETG prusament) and a good maintenance of the printer, you should not have any problem to print the fine pitch thread.

It is necessary to use support material in the side window of the adapter, but it can be blocked in other parts if you place the piece as shown in the images.

Among the parts to be printed I have optionally included two covers to protect the filters from dust. One rigid with a T2 thread and another flexible.

 

Print material and settings

Prusament PETG is a good material for this model.

In the configuration files you will find the print settings I used for these pieces.

 

Material addicional

x2        ISO_4017_ Screw _M4x16

x1        ISO_4017_ Screw _M3x20

x1        ISO_4032_Nut_M3

x2        ISO_4032_ Nut _M4

  

Parts and Assembly 

The filters must be pressed onto the filter holder rings. A slight turn in favor of the elastic arms of the piece facilitates assembly.

I recognize that it is laborious to adjust these pieces with a smooth operation, but once achieved it is very satisfactory and practical to use this adapter.

 The piece Utillatje.stl is used as a tool to assemble and disassemble the part Anell portafiltres 2.

 This material is used by the AstroMontseny team. Join us on Instagram: https://www.instagram.com/astro_montseny/

I hope these pieces are useful to you and that you have good night skies!!!!

Tags