Floor Sweep Vacuum Attachment for 4in dust collector and Dewalt Shop Vac
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is a floor sweep attachment for two types of vacuum systems: a 4in shop dust collector and Dewalt Shop VAC
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 121
- Makes
- 1
- Views
- 909
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a floor sweep attachment for two types of vacuum systems. The first variation is for a 4in shop dust collector using standard 4in flexible hose. The second is for a Dewalt 8 gal Shop vac. The design was inspired by other designs and remade to fit my specific requirements.
The model is split into 4 pieces that are to be glued together using CA glue. I used M1100G Thick/ Gap filling adhesive from Mercury Adhesive. The frame dovetail joint is a tight fight and didn't need any adhesive. The dovetail may require some post processing if the fit is too tight.
The frame includes a bracket that can be used to screw the attachment to a board for weight to keep the attachment on the ground or as a permanent fixture. Please not the bracket has a slight angle to assist with keeping the frame tight to the ground.
I used PETG from Prusa with the standard settings. Layer height .2mm.
