1 / 2
Floor Sweep Vacuum Attachment for 4in dust collector and Dewalt Shop Vac — zdjęcie 1
1 / 2

Floor Sweep Vacuum Attachment for 4in dust collector and Dewalt Shop Vac

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model is a floor sweep attachment for two types of vacuum systems: a 4in shop dust collector and Dewalt Shop VAC

Ocena
5 / 5
Polubienia
30
Pobrania
120
Wydruki
1
Wyświetlenia
903
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This model is a floor sweep attachment for two types of vacuum systems. The first variation is for a 4in shop dust collector using standard 4in flexible hose. The second is for a Dewalt 8 gal Shop vac. The design was inspired by other designs and remade to fit my specific requirements.

The model is split into 4 pieces that are to be glued together using CA glue. I used M1100G Thick/ Gap filling adhesive from Mercury Adhesive. The frame dovetail joint is a tight fight and didn't need any adhesive. The dovetail may require some post processing if the fit is too tight.

The frame includes a bracket that can be used to screw the attachment to a board for weight to keep the attachment on the ground or as a permanent fixture. Please not the bracket has a slight angle to assist with keeping the frame tight to the ground.

I used PETG from Prusa with the standard settings. Layer height .2mm.

Tagi