Fixed A-Part for Double 3D Chameleon
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
adjusted the spacing on the A part to make it line up for both sides
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 11
- Makes
- 0
- Views
- 86
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a replacement part for the Double 3DC by Tim B.
I noticed when one side was lined up, the other side was not.
So I cut it up in CAD and lined everything up and now the sides are perfectly aligned!
Hoping this is the final piece in the puzzle of getting this working reliably.
I removed one of the A+ markings from the inside. This was intentional since I wasn't sure if the orientation would matter with this mod. The idea is you install the B+C parts with the markings all on the same side. IDK if this matters, but worth mentioning in case it does.
All of the other parts from the Double 3DC work so I did not reupload them here. Just print this A part twice instead of the original and you're good to go.