3D Chameleon PTFE Bowden 4-Way Splitter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the 4-Way Spitter i use on my Auto Clippy set up
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 55
- Makes
- 1
- Views
- 513
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is the 4 Way Splitter i use with my Auto Clippy set up!
I haven't printed this model in along time as the last one i printed is still working to this day!!
I have not had no issue with this system and it seems to be working great
INSTRUCTIONS
When installing this into the Auto Clippy set up, please manual ( and with power off ) close the filament knife cutter so its covering the filament path.
Screw in the 4-Way Splitter carefully until you feel it hit the filament knife cutter.
Once it hits the knife back it off a little bit!!
I've also designed it to be used with PTFE quick connects that allow you to push the PTFE tube through the connector fully and that it will push up to a smooth transition inside the splitter..... This is done for smoother filament swaps and prevents jams!
I have also attached the settings and orientation i printed this splitter with!!
if you have any questions or concerns please ask and i will try to help!!
Thanks!
Happy Printing!!!