Hanukkah Menorah
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
hanukkah menorah LED-based with a button to switch the days forward, adding one "candle" per press
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 12
- Makes
- 0
- Views
- 132
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
The firmware for the menorah is available here: https://github.com/Alshochat/Menorah/tree/main
file list and instructions:
part | QTY | Special instructions |
|---|---|---|
Base Bottom RP2040 Super Mini No Battery | 1 | |
Base TOP | 1 | |
Bottom Part Duct | 1 | |
Bottom Part Lid | 1 | |
Button cap | 1 | |
flame full | 9 | No infill, no bottom layers, 3 walls |
LID | 5 | |
Menorah Chanukah part - Bottom | 1 | |
Menorah Chanukah part - Left | 1 | |
Menorah Chanukah part - Right | 1 | |
Menorah Chanukah part - Shamash | 1 | |
Menorah Chanukah part | 2 |
item | link |
|---|---|
3 mm leds | |
raspberry pi pico super mini | |
cherry mx switch |
Wiring:
leds 1-9 are connected to GP0-8 accordingly (positive side)
The button is connected to GP14 (one pin)
and all the rest of the pins are connected to GND
