Proedge Guide for sharpening of Crown flat roughing gauge 32mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This print will help you to maintain a loveley fingernail grind on your extra wide roughing gauge
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Proedge width limitation
Robert Sorbys Proedge sharpening system has a width limitation of 25mm when using the fingernail profile accessoires.
Crown hand tools flat roughing gauge 32mm
Crown Hand Tools Ltd. offer a flat 32mm roughing gauge, featuring a fingernail profile grind.
So, using the Robert Sorby Proedge sharpening system you get no chance to put fingernail profile grind on that roughing gauge. This is why I designed that little awkward holder.
I used PETG, 25% gyroid infill, 4mm seam, 0,.25mm layer height. Components should already be aligned correctly.
Hardware
1x M6 nut
1x M6 knob / bolt (30mm should do)
Usage
Put the gauge in the holder as you would with the normal one from Robert Sorby. You then tighten the already tight fit with the pressure plate. The angle is set the usual way. Grind away!
Be careful around rotating things, melting plastique and flying sparks!