Proedge Guide for sharpening of Crown flat roughing gauge 32mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This print will help you to maintain a loveley fingernail grind on your extra wide roughing gauge
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Proedge width limitation
Robert Sorbys Proedge sharpening system has a width limitation of 25mm when using the fingernail profile accessoires.
Crown hand tools flat roughing gauge 32mm
Crown Hand Tools Ltd. offer a flat 32mm roughing gauge, featuring a fingernail profile grind.
So, using the Robert Sorby Proedge sharpening system you get no chance to put fingernail profile grind on that roughing gauge. This is why I designed that little awkward holder.
I used PETG, 25% gyroid infill, 4mm seam, 0,.25mm layer height. Components should already be aligned correctly.
Hardware
1x M6 nut
1x M6 knob / bolt (30mm should do)
Usage
Put the gauge in the holder as you would with the normal one from Robert Sorby. You then tighten the already tight fit with the pressure plate. The angle is set the usual way. Grind away!
Be careful around rotating things, melting plastique and flying sparks!