Harman Kardon Rabco ST-8 Leveling Foot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Leveling foot for the ST-8 turntable. May also work for ST-7.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement foot for the Harman Kardon Rabco ST-8 linear turntable. While the original used a "knurled" rubber band, the replacement has the knurling modeled into the part, as the rubber part is hard to find.
Print in your favorite filament, open side down. Use paint-on supports for the center. For best results:
layer height 0.15
infill 40%
After printing use a sharp knife to remove any "elephant foot" blocking the threads. Add a 3/4" felt dot to complete the part.
The HK-foot-male model is a tool that can be used to make sure the threads are clean before installation. Discard after use.