RatRig VCore4 400 mm Panel Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple brackets to hold panels on side of printer during maintenance or low temp filament printing on 400 mm VCore4
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I don't have a convenient place to keep the front and top panels, so these brackets hold the panels on the side of the printer. I don't try to print with high accelerations, which would be a problem because the panels wiggle. Someone else had design similar brackets for another printer (but I can't find the post), but these work on my 5 mm panels on my 400 mm VCore 4. I have included the FreeCAD model with the key dimensions included in the Dimensions VarSet. In particular the widths of the panels can be changed (Width1 and Width2).