RatRig VCore4 400 mm Panel Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple brackets to hold panels on side of printer during maintenance or low temp filament printing on 400 mm VCore4
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I don't have a convenient place to keep the front and top panels, so these brackets hold the panels on the side of the printer. I don't try to print with high accelerations, which would be a problem because the panels wiggle. Someone else had design similar brackets for another printer (but I can't find the post), but these work on my 5 mm panels on my 400 mm VCore 4. I have included the FreeCAD model with the key dimensions included in the Dimensions VarSet. In particular the widths of the panels can be changed (Width1 and Width2).