1 / 2
Boat/caravan toilet brush holder (dishbrush holder) — image 1
1 / 2

Boat/caravan toilet brush holder (dishbrush holder)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A brush holder. I made this for my boat, but it could be used in the house.

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
62
Reviews
0

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution — Noncommercial

I designed this for my boat. I use a dishbrush as a toilet brush, so I needed a holder for it and I didn't want it flying all over the place while underway. This holder has 2 parts. There is a back plate which can either be screwed to a backing board, cupboard door, etc, or it can be attached with double sided tape. I have made it so both work equally well.

The bucket slides into the bracket. This allows the bucket to be taken out and drained, or washed as required. There is a very slight taper on the back so it is easy to insert. 

This would also be ideal for a caravan and could also be used to hold a dishbrush in the kitchen. I printed in PETG because it can get hot in the boat, but PLA would be fine for indoors.

Tags