CFS spool adapter with space for desiccant.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Universal spool adapter for CFS with inner space for desiccant.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 55
- Makes
- 0
- Views
- 345
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Universal spool adapter for CFS with inner space for desiccant.
Unfortunately, if the difference between the outer width of the spool and the adapter is too small, the spool sometimes rests on the protruding tongue inside the CFS housing. So I came up with another adapter, for the CFS - https://www.printables.com/model/1535687-cfs-smaller-diameter-spool-adapter
So spool adapter can accommodate spools with inner diameter ranging from about 62mm (I think the Sunlu has the smallest center diameter of any spool I have) to about 74mm.
The width can be adjusted and there's room inside for a desiccant.
I've printed the adapter using ASA, but only because I want to modify/install a filament dryer mod into my CFS.
PETG should be the best choice because the "arms" that press and center the spools have to bend a lot with small spools, PLA would probably break immediately.