1 / 4
Galileo 2 G2E Better Umbilical Mount V2 with FreeCAD file! — image 1
1 / 4

Galileo 2 G2E Better Umbilical Mount V2 with FreeCAD file!

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A slimmed down G2E Umbilical Mount V2- extra 4mm clearance to rear motors = full use of printing surface.

Rating
5 / 5
Likes
6
Downloads
23
Makes
1
Views
160
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

After finally installing my G2E extruder I was surprised to learn that several of the pug umbilical mounts and even my slimmed down first version didn't clear the rear motors during homing X (rear right), or at the rear left XY corner. If using any other umbilical mount, to avoid crashing into the rear motors, a spacer block- for example ( ~ 5 mm ), needs to be added onto the rear of the Y linear slide to activate the micro switch several millimetres earlier. I did this until I designed a new G2E Umbilical Bridge.

https://www.printables.com/model/1506096-voron-y-home-spacer-bumpstop

This second new V2 bridge is my final version for the carbon rod support style and what I'm using now.  It is wider to maintain rigidity while the CAN Cable is now inset well into the new thinned bridge body. Now, the Stealthburner with the G2E planetary gear addition and rear umbilical mount clear the rear motors with several mm to spare. Also, the small ziptie heads are now recessed into the bridge mount body providing another 4mm greater clearance to the rear AWD motors.

I finally stepped up to a 0.64 mm carbon steel rod.  Insert the rod downward into the body until it bottoms out in the access hole.  Insert a small screwdriver into the access hole and bend the rod upwards and outward until you can grab it with needlenose pliers. bend the rod to 90  degrees and snip off the end as flush to the rear boby as possible. Use some thick CA glue and accelerator if you have some and fill the hole to embed the 90 bend. You will now have a securely retained rod in the umbilical mount. Copy how I have installed the CAN Cable and use zip-ties to hold the cable in place before the umbilical bridge is attached to the extruder.

You may also be interested in my other Voron Trident mods shown here or at https://www.printables.com/@JimChristian_3198049  &  https://www.printables.com/@JimChristian_3198049/models  They work well  :-)

Also, if you find value in this, please give it a like. Thanks.

This was finished using a FreeCAD dev that I compiled last night:

OS: Debian GNU/Linux 13 (trixie) (X-Generic/xwayland)

Architecture: x86_64

Version: 1.2.0dev.44643 (Git)

Build date: 2025/12/12 18:59:55

Build type: Unknown

Branch: main

Hash: 442a36bea6416af611abd3c5ca4fe957722f424a

Python 3.11.13, Qt 6.8.3, Coin 4.0.3, Vtk 9.3.1, boost 1_86, Eigen3 3.4.0, PySide 6.8.3

shiboken 6.8.3, xerces-c 3.3.0, IfcOpenShell 0.8.2, OCC 7.8.1

Locale: English/United States (en_US)

Navigation Style/Orbit Style/Rotation Mode: Blender/Rounded Arcball/Window center

Stylesheet/Theme/QtStyle: Darker.qss/Darker/

Logical DPI/Physical DPI/Pixel Ratio: 96/96.237/1.25

Installed mods:

* OpenTheme 2025.5.20

* ProDarkThemePreferencePack 1.0.0

* freecad.gears 1.3.0

* FreeCAD-themes 2025.6.4

Tags