1 / 5
Sim Rig Headphone Holder – 8020 / Aluminum Profile Mount — image 1
1 / 5

Sim Rig Headphone Holder – 8020 / Aluminum Profile Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple, sturdy headphone holder that mounts directly to your aluminum profile sim rig.

Rating
0 / 5
Likes
5
Downloads
43
Makes
0
Views
258
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

🧾 Required Hardware (not included)

You’ll need:

  • 1× M8 screw (length depends on your profile, ~16–20 mm works for most rigs)

  • 1× M8 T-nut for your aluminum profile slot

Everything else is 3D printed in a single piece.


🧩 How to use

  1. Print the stand (see settings below).

  2. Slide the M8 T-nut into the slot of your rig’s aluminum profile.

  3. Line up the hole in the stand with the T-nut.

  4. Insert the M8 screw through the stand and thread it into the T-nut.

  5. Tighten until the stand is snug and doesn’t move.

  6. Hang your headphones on the hook.

Works great on most 40-series and similar profile sim rigs.


🖨 Print settings (recommendation)

  • Material: PLA or PETG

  • Layer height: 0.2–0.28 mm

  • Perimeters/walls: 3+

  • Infill: 25–35% (for strength at the mounting point and hook)

  • Supports: Only if your slicer shows issues under the hook curve (often not needed)