Prusa XL Filament Roller, SUMO Enclosure Remix, profiled roller and captive bearing Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix from bomtarnes --> Smorbickles --> e645824. I added a profiled roller and captive bearings.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This remix builds on Smorbickles' spool holder. bomtarnes --> Smorbickles --> e645824
Although that spool holder was specifically for SUMO enclosures, I remixed it as follows:
profiled the roller so that the spool doesn't wander around. Should work with 1 kg (6cm) and larger (10cm) spools.
Added captive brackets so that the bearings don't pop out.
All printing is done vertically for a smooth profile. No supports are needed.
The screw channel is shortened. This allows for common-length screws. Allows for either M4 and M5 screws.
When printing the roller, definitely use a glue stick since I specifically did not use a brim. The 3 small pegs seem OK without a glue stick, but might as well use a glue stick for them anyway.
Everything is press-fit together. I have a Prusa XL 0.4mm and used Hatchbox PETG. The 3 pegs are sized 98% of the holes. YMMV if you have a different printer or use different filament. The pegs are separate items in the *.3mf file so can be easily resized independent of the other components.
After printing, press-fit the pegs into the holes; no adhesive is needed. The pointy peg goes into the roller, the other two pegs go into the main body and hold together: main body, bearing bracket, and end-cap. Install the roller with both bearings before putting on the end-cap.
My OpenSCAD file is attached. Likewise, my 6 STL files are also attached.