Spice Jar Lid
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.40 – €0.49 net (excluding VAT)
For file: Spice Jar Lid V02_0.4n_0.2mm_PETG_COREONE_26m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.44 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 26.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replacement lid for spice jars.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 1
- Views
- 122
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Repairing a broken spice jar lid. Some people break things, and others fix them. 😎
Note: Unfortunately, these glasses have relatively large manufacturing tolerances. However, this issue is very easy to resolve by simply adjusting the dimensions in the X and Y axes; an offset of 0.5 mm should be entirely sufficient.
Print instructions:
Material: PETG
Layer: 0,2 mm
Perimeters: 2
Print speed: slowly
Supports: No
Brim: No
This model does not require any special settings, more details in the attached 3MF file.
Custom modification:
If you want to modify the model, I am attaching the STEP file and a link to my OnShape.
You can easily modify the model by changing the variables.
Current model version:
V02, V03
Update 2025/12/21:
Added version without a groove (V03).
Note:
Please don’t forget to leave a comment and rating. I truly appreciate any feedback – it helps me improve and address any potential shortcomings in the model. Thank you very much!