Crank Box V2
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€15.68 – €19.17 net (excluding VAT)
For file: 1001.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €17.43 excluding VAT (range midpoint).
- Weight reported by the author
- 300 g
- Print time reported by the author
- 13.5 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Its basically a crank box that you store things in! It opens by using four separate gears. It is also lego compatible!!!
- Rating
- 4 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 1
- Views
- 86
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
Short Description
It's a container for whatever you want to put inside. I originally designed V1 to store my mechanical pencils but it was too bulky and weird to carry to school. So V2 is all about being sleek and cool enough to bring in your bag. My best friend is left handed so I made this left hand compatible too! Oh and also we both love legos so you can put minifigs on the top if you want! I loveee cranks so i thought this would be my into to 3D modelling! Feel free to use it and I hope you love it as much as I do!!
Assembly
Mostly all of it is printer separately but I'll give you a quick tutorial on how to assemble. So first things first, connect the big rectangle connectors to the large gear and fix both into the extruded part inside the box. Then take the smaller gears and put them inside the box with the extruded part through the hole from the inside. Then connect the cranks. Next thing is to fix the top to the connectors. It WILL poke through outside. It is intentionally done so that you can put sticky notes on it!
Challenges
The biggest challenge i had with this was selecting the lego studs. It took me a LONGG time to select each one and copy and paste and then select once more to center it and select again to extrude it.
IMPORTANT
It also comes included with two extra swappable tops! It features my favorite anime logos so feel free to remove them while slicing if you don't want them printed!
please ignore the gcode