PG48 Blind Stuffing-Adapter to 5xPG9 Cable Gland/ PG48 Blindstopfen-Adapter auf 5xPG9-Kabelverschraubung
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.86 – €2.28 net (excluding VAT)
For file: PG48_BlindStuffing_PGthread_to_5xPG9_PGhread_v00_Set_0.20mm_PETG#2_0.2mm_PETG_MK3SMMU2S_2h17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.07 excluding VAT (range midpoint).
- Weight reported by the author
- 23 g
- Print time reported by the author
- 2.28 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
PG48 blind stuffing-adapter to close opening for PG48 cable gland in housings (ca 59.3mm) + Adapter to (1-4)xPG9 gland.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 22
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
PG48 threaded blind stuffing to close unused PG48-openings in housings.
Adapter for (1-5)xPG9 cable glands for smaller diameter wires.
Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread.
[1] Thread types:
PG thread (PG48, PG9)
[2] Diameters for openings:
Diameters for PG48 opening:
a) threaded hole: 57.8mm / PG thread
b) drill hole without thread: 59.3mm
Diameters for PG9 opening:
c) threaded hole: 13.9mm / PG thread
d) wire diameter: 8.0mm
[3] Sealing:
An optional TPU-sealing model file is available for PG42.
An optional TPU-sealing model file is available for PG9.
Print
Material: PETG (blind stuffings, nut), TPU 95A (sealing)
Supports: not required
Brim: not required
Serial printing (part by part) for better thread quality.
Materials
1x PG48 adapter (PG48 thread)
[PG48_BlindStuffing_PGthread_to_5xPG9_PGthread_v00.stl]
1x PG48 blindstuffing nut (PG48 thread)
[PG48_Nut_PGthread_v00.stl or
[PG48_Nut_PGthread_v10.stl]
(1-5)x PG9 cable gland (PG9 thread)
[see link]
(4-0)x PG9 blind stuffing
[PG9_BlindStuffing_PGthread_v00.stl]
(4-0)x TPU sealing PG9 (optional)
[PG9_TPU-Sealing_v00.stl]
Assembly
[1] PG9 cable gland pre-assembly
Screw PG9-cable glands (PG9-thread) into the PG9 openings of the adapter.
Close unused PG9-openings with PG9-blind stuffings.
Use optional TPU PG9-sealings if necessary.
[2] PG48-adapter assembly
Place the pre-assembled P48-adapter (blind stuffing) in the PG48 opening and secure it with a PG48 nut.
Optionally place PG48 sealing on the PG48-adapter before assembly.
[3] Cable assembly
Guide cable through PG9 cable gland and fix cable by fastening the corresponding cable gland nut.
Hint:
Apply some silicone grease on the thread, so it can be easily be assembled and disassembled.
(Without grease, the thread tends to wind on and off somewhat “sticky”.)
Links
[PG48 Blind Stuffing] (PG48 nuts, PG48 sealing)
[PG9 Blind Stuffing] (PG9 blind stuffing, PG9 sealing)
[PG9 cable glands] (example)
https://www.amazon.de/dp/B07V9GPP6Z?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
[silicone grease] (example)
https://www.amazon.de/Liqui-Moly-3312-Silicon-Fett-transparent/dp/B00295DBQE/ref=sr_1_6?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=13P9WALTPP1IB&dib=eyJ2IjoiMSJ9.0en-W9socDknrZdX2QHaikS46OxFp0GJ9Qrc9p2bt_sKjnOY9bCpiqjMc6bTJJX2GGAZDBxyFX_vHtAnqCVileu1t4W11bgIF0aXKpUwCqC7DSgRVP-c6xECJn8HhOunDk_-Cz2POIH9U0bXfJyMWd3SdSM6knaFTvhn4Cc4ZFL8VTEusVhIc33B7H1cYgCJuClMYtl4kDc4aJ-qNqe-MWTY77wjShKFiTosBieXkSwQY1eBBUhSie5mSNMvEqX3tAcYhTJKOwUguJYAiHGZQ8TBibkkP7Ef3p1N8mYtmUw.4adOAarD_WA03sc4BXkRMfcwVv9uMV9lrrVtavEWGAs&dib_tag=se&keywords=silikonfett&qid=1765141206&sprefix=silikonfett%2Caps%2C125&sr=8-6