Counting matching models…
Adapter to mount a D-Type Socket safely in rack with strain relief. M3 heat set inserts for safe and easy mounting. For racks or just use it for your own adapter. Fits a PG9 cable gland
the files like pg9.2.2 doesn't mean anything its a rev number for me since i had to redo it a few time to get it right.
PG9 threaded blind stuffing to close unused PG9-openings in housings. (normal usage) [Extension for PGxx to PG9 adapters] For the use with PG-adapters (PGxx to PG9) with very little space between the PG9 cable gland openings, I added a…
Needed the larger gland in order to use the 3DO CAN Bus + USB cable, as well as I wanted to attach a fiberglass rod to the cable through a cable sleeve to keep the wire from sagging. I am Paring it with another remix I made here…
This is a remix of Jimmer Jammer's remix, of rsavell's design for a wireless charging dock. The original design was awesome, but like others, my Samsung S8 plus with a thick SPEC case on did not fit in the original. So I opted for Jimmer…
Remix of Mauxx91 's Umbilical cable cover to add compatibility for PG9 or PG11 cable glands
This is an insert for 3/4" conduit boxes that is threaded for PG9 and PG7 glands. When used with a Type C conduit box and PG9 gland, it makes a great outdoor case for a Sonoff basic. The box is commonly found in the electrical section of…
This is a remix of jphalip's hartk's pg7 mount but made to fit a pg9 instead. the files like pg9.6 doesn't mean anything its a rev number for me since i had to redo it a few time to get it right.
I used these print setting: 4 walls 5 top/bottom 30-40% infill Might be overkill for this, but it works. Like with the original PG7 by DonaldSayers, carefully use a knife to split the spirals. This one is a bit easier (for me) due to it…
5 minute print on a MK4S in PetG. .25 structural layer height. Nothing special this is a small part and you can tweak fill etc as needed.
PG21 threaded blind stuffing to close unused PG21-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
Designed this casing for the True1 socket with outlet to create safe connections in rack with our laser cut rack ears or standalone for speaker systems. Simply screw in the cable glands on the back and use some 3mm screws for mounting the…
I needed a good way to secure the wires coming from the umbilical in to the chain. The model is printed with standard Voron settings: ABS/ASA 0.2mm Layer height 0.4mm Extrusion width 4 Walls 5 Bottom/Top 40% Infill Place the model with…
PG36 threaded blind stuffing to close unused PG36-openings in housings. Adapter for (1-4)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…
PG36 threaded blind stuffing to close unused PG36-openings in housings. Adapter for (1-3)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
I was looking for a stand for my phone, a Samsung Galaxy Note 9 that could hold my old Samsung EP-PG900IBE square charger that I had laying around and I found david4974's old S6 one and used TinkerCAD to modify it. I exploded it into…
PG9 without thread Please use two suitable M3 screws to tighten
Verwendung Diese Box dient der Aufnahme von 3 WAGO-Klemmen 221-2411 in Verbindung mit handelsüblichen Verschraubungen M16 oder PG9 und kann für vielfältige DIY-Projekte zur Reparatur oder Verlängerung von 3 adrigen Leitungen genutzt…
PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-4)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
PG48 threaded blind stuffing to close unused PG48-openings in housings. Adapter for (1-5)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
PG48 threaded blind stuffing to close unused PG48-openings in housings. Adapter for (1-6)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…
Allows you to use different connections and sealed strain reliefs for Duet 3 CNC enclosure
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-5)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-5)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…
I wanted a PG9 mount instead of the PG7. This is for Grimm Creations Filamatrix model.
Needed the larger gland in order to use the 3DO CAN Bus + USB cable, as well as I wanted to attach a fiberglass rod to the cable through a cable sleeve to keep the wire from sagging. I am Paring it with another remix I made…
Various plugs to fix mistakes or as you change setups. Use a bead of silicone and you're all set. Category: Other
I wanted a PG9 mount instead of the PG7. This is for Grimm Creations Filamatrix model.
Montagewinkel für eine PG 9 Verschraugung Material: PLA Noozle 0,4 Schichtdicke 0,2mm gezeichnet mit FreeCAD 0.20.1 2023-03-05 FrankWL
