3D Chameleon Neptune 4 Plus 3DC End Stop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a new Desgined End Stop For my 3DC microswitch
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my 3DC end stop mount I've designed to be used on my Neptune 4 Plus!
My Neptune 4 plus has an unused screw hole in the bed frame, so using this screw hole, I've installed a screw that sticks out so it can be used to press the micro switch to activate my 3DC..
if your machine doesn't have this hole I'm sure you can just manually drill the bed frame and install a screw... or make something to push this end stop..
I'm no longer using the stock 3DC end stop that comes with the kit as it is too bulky... so I've been using this switch!
https://www.amazon.ca/dp/B09BQ7DCFN?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4&th=1
you will have to trim the unused hole mount on the switch and rewire it to match the same NO and NC input/output of the 3DC
if you have any questions please feel free to ask!
Happy Printing!