1 / 2
Rear Leafspring Conversion for Element RC Knightrunner
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
rear only kit, requires FMS rear leafs and 4 M2.5 nuts (M2 hardware can work too if you have those)
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 13
- Makes
- 0
- Views
- 260
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
this is for the rear only, since I am modeling it after a real tacoma and IFS's don't have leaf springs. you need the FMS rear leaf spring kit (this one) and 4 M2.5 nuts. or you can also use M2 hardware for the holders/mounts, if you would rather not buy M2.5 nuts. it works either way, i personally use M2 hardware cause I have so much lol. if the link doesn't work in the future then just search for the "1/10 Atlas Rear Leaf Springs". i'll post a video eventually showing how to install them. happy crawling!