Rear Leafspring Conversion for Element RC Knightrunner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
rear only kit, requires FMS rear leafs and 4 M2.5 nuts (M2 hardware can work too if you have those)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
this is for the rear only, since I am modeling it after a real tacoma and IFS's don't have leaf springs. you need the FMS rear leaf spring kit (this one) and 4 M2.5 nuts. or you can also use M2 hardware for the holders/mounts, if you would rather not buy M2.5 nuts. it works either way, i personally use M2 hardware cause I have so much lol. if the link doesn't work in the future then just search for the "1/10 Atlas Rear Leaf Springs". i'll post a video eventually showing how to install them. happy crawling!