CheeseMix NATO Rail with safety pins (2 to 10 holes long)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3d Printable NATO rail for camera rigging.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 50
- Makes
- 0
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
3d printable NATO rail for camera rigging. Mounting holes are 18mm apart, compatible with CheeseMix plates and accessories. This pack includes rails from 2 holes long to 10 holes long. Each rail has a sprung pin on each end to keep hardware from sliding off incase something comes loose. I made the springs by straightening a pen spring and bending it into a U shape.

Printing | |
|---|---|
Layer Height | 0.2mm |
Walls | 3 or more |
Top/Bottom | 3 or more |
Infill | 25% or more |
Support | No |
CheeseMix is designed for 1/4-20 hardware. The main fastener is a 0.5" (1/2) long cap screw with a head Diameter of 0.375 (3/8) and a head thickness of 0.125" (1/8). The bolt head sits bellow the surface of the plate, recessed in the hex pockets. Nuts should be 7/16 flat to flat and 0.1875" (3/16) thick, or less, to sit bellow the surface of the plate.