Dactyl Maniform Pro-Micro V2 Type C - Sled
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This sled is for the dactyl manuform keyboard by joshreve. It holds a type C version of the arduino pro-micro v2
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 185
- Makes
- 0
- Views
- 1,733
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
This sled is for the dactyl manuform keyboard by joshreve. The sled is a derived version of the pro-micro v1, pro-micro v2 and Elite-C V1 sleds created by lolligag.
This sled is designed for the AITRIP Promicro with USB C, a slightly cheaper version of the standard pro-micro with an included type C port. There is an included shim which can accept a regular type C pro-micro if you have one of those
I've made some adjustments to clearances and fitments compared to the original sled, I found I had a hard time installing the sled into my case and wanted to provide STEP and SLDPRT files so makers can adjust their tolerances.
Another change is making the TRRS jack flush with the outer surface of the keyboard to allow for beefier jacks to be plugged in.
Finally, I've added a set screw to the TRRS jack versus the original plastic tab. Since this jack will see the most plugging cycles I wanted to add an adjustable brace which should hold up for a longer time.
It accepts a standard M3 nut and M3x12 socket head screw