Better Magnetic Door Latch for 1515 Extrusion (Micron, Voron 0)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stronger latches, which do not require preloading the 1515 extrusion with nuts.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 199
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
The original Micron+ door corner magnets did not work well for me - fasteners reacted too much to the heat inside the chamber.
This latch uses 4 6×3 mm magnets glued into slots in order to hold strongly. The frame part is press-fitted from the side and secured with a M3×12 screw. It holds just enough to prevent movements along the rail, but do not expect a completely rigid attachment, I guess the slight movement makes it function even a bit better.
V2: Compatible with the twist-lock features in Micron R1. Twist lock key added from the original GitHub repo.