1 / 1
Better Magnetic Door Latch for 1515 Extrusion (Micron, Voron 0) — zdjęcie 1

Better Magnetic Door Latch for 1515 Extrusion (Micron, Voron 0)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stronger latches, which do not require preloading the 1515 extrusion with nuts.

Ocena
0 / 5
Polubienia
4
Pobrania
16
Wydruki
0
Wyświetlenia
199
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The original Micron+ door corner magnets did not work well for me - fasteners reacted too much to the heat inside the chamber.

This latch uses 4 6×3 mm magnets glued into slots in order to hold strongly. The frame part is press-fitted from the side and secured with a M3×12 screw. It holds just enough to prevent movements along the rail, but do not expect a completely rigid attachment, I guess the slight movement makes it function even a bit better.

V2: Compatible with the twist-lock features in Micron R1. Twist lock key added from the original GitHub repo.

Tagi