Intel NUC NUC7I5DN Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for the Intel NUC mainboard, specifically NUC7i5DN.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 106
- Makes
- 1
- Views
- 544
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Case for the NUC7I5DN Intel NUC motherboard, which along 8G of RAM and 64G SSD i could source for like 25$. Sadly they didn't come with a case, so made my own.
Notes:
Feet required, air intake is on the bottom, so we could have some airflow over the RAM and VRM.
Intake and exhaust guards are meant to be printed with 0 top, bottom and wall loops, just ~20% infill
Feet ware made from TPU
Case is meant to be printed with some kind of semi-transparent material, like PET-G, so front LED would be visible.
If You use full opaque filament, well - drill a hole
Bottom cover & mainboard standoff holes should contain 4x3x3mm threaded inserts
Front & back panel mounting holes are meant to be tapped with M3 tap. But wood screws should be also fine here
It should fit any UCFF main board, but most likely You will need to make front & rear panels for it
Use internal WiFi antennas