Yardforce robotic mower damper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The dumper is reducing mower noise. It should be flexible enough. You may vary infill density to have adequate…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
The dumper is reducing mower noise. It should be flexible enough. You may vary infill density to have adequate result.
Second point is 5x10mm M6 nut. Each nut needs groves to fit unto damper housing.
I glued the nuts with scratched facets using superglue (Cyanoacrylate).
Print Settings
Printer Brand:
UltiMaker
Printer:
Supports:
Yes
Resolution:
0.2 is OK
Infill:
depending on material
Notes:
Supports are required for center part of damper only. Suppress support generation where nuts should be placed to avoid unnecessary filament usage.
Category: Replacement Parts