Counting matching models…
This is the GPS mount I'm using to mount the UBLOX RTK GPS antenna inside my YardForce Classic 500 mower. In the picture you can see a mount for an external IMU, but this won't work since the UBLOX antenna has a magnet in its base.…
These spike are a quick model that lips onto the inside edge spikes of the original wheel. they should work by just clipping them over the inside spikes on each wheel making 8 extended spikes per wheel. The 17 mm spikes are probably too…
*This part was designed for a Yardforce SC600ECO mowing robot. Possibly it can also be used for other Yardforce mowers. Yardforce mowers are also sold under other brand names such as Mr. Gardener, Grizzly, Florabest or Ferrex. Please let…
*This part was designed for a Yardforce SC600ECO mowing robot. Possibly it can also be used for other Yardforce mowers. Yardforce mowers are also sold under other brand names such as Mr. Gardener, Grizzly, Florabest or Ferrex. Please let…
This is a custom design for a Yardforce tire. The original tire tends to accumulate grass, causing the tread to wear down. This new design aims to prevent that issue. Please note, the tire is still in the testing phase.
The front wheels of the YardForce Classic 500 mower tend to clog with grass (at least for me), especially if the length of the cut grass is longer and wet. This leads to significantly reduced mowing time per battery charge and an…
This is a internal mount for an ArduSimple Survey GPS antenna mount for the Yardforce Classic 500 - the main mower of the OpenMower project ( https://github.com/ClemensElflein/OpenMower ). My chassi is six month older as the one from…
Two pieces of 608 ball bearings are required. zwei stück von 608 kugellager werden benötigt.
My old but still working Yardforce lawn mower roboter had increasingly problems detecting obstacles like trees etc. Its wheels just continued to turn head on the obstacle, digging itself into the gorund. A look at the wheels reveiled that…
A Speaker holder, designed as box, with louder and more voluminous sound for my https://openmower.de/ build. Will fit in the left or right middle slot of a YardForce Classic 500. Update 08/17/2023 Redesigned a version 4 variant with these…
OpenMower YardForce SA/SC/NX Speaker Box for Visaton K40SQ for use with DFPlayer Mini. Print with PETG 0.2+ Layer Height
*This part was designed for a Yardforce SC600ECO mowing robot. Possibly it can also be used for other Yardforce mowers. Yardforce mowers are also sold under other brand names such as Mr. Gardener, Grizzly, Florabest or Ferrex. Please let…
OpenMower YardForce NX100i Ardusimple Helical GNSS Antenna Mount print with TPU / TPC for better flex and sealing TPU: shore 60-70D, TPC 30D or 40D gasket optional when printed with TPU foam like Varioshore, beware of changing sizes mount…
Changes: screw holes are widened to fit M4 screws tiny legs are reinforced with DIN912 M2 20mm screws
The add on carrier mounts on the original 3 blade holes with the original blade holding bolts. Another 6 bolts, blades and and 6 M4 nuts (ideally Nylocks) transform your timid Yardforce 805 (and probably also the other budget Eco 500,…
Hier habe ich für den MowBest 805 ein Satz Ersatzreifen erstellt. Die Reifen habe ich mit einem Prusa MK4s und einer MMU3 gedruckt die Felge mit PLAx CF von Nobufil und die Reifen mit TPU. Kann auch komplett aus PETG/PLA gedruckt werden.
*Text to be written - make better pics* Fits at least the SA/SC series and Classic 500 dock
This part was designed for a Yardforce SC600ECO mowing robot. Possibly it can also be used for other Yardforce mowers. Yardforce mowers are also sold under other brand names such as Mr. Gardener, Grizzly, Florabest or Ferrex. This part is…
A Speaker box, which uses the back-hole of the stock- beeper, as sound- output for my https://openmower.de/ build. Build for YardForce SA600H, but might also fit to other SA/SC models (please report). My major Print values: PLA, 0.4mm…
I use these mounts to hold the antenna for the radio link to the GPS RTK base station in place. The two parts are slightly different in terms of the mounting holes and diameters for the antenna. I printed them in PLA, but perhaps PETG,…
This holder mounts to two of the standoffs in the front part of the mower. The standoffs are drilled and M3 heat set inserts (I used BOSSARD 1386743) are pressed in. M3 screws are then used to secure the holder. The PCB to the left of the…
I tried to remodell the original wheel. It holds one circlip behind the cup, like the original.
This is the GPS mount I'm using to mount the UBLOX RTK GPS or HA901 antenna inside my YardForce Classic 500/500B mower. Print in PETG
OpenMower YardForce NX100i Ardusimple Helical GNSS Antenna Mount print with TPU / TPC for better flex and sealing TPU: shore 60-70D, TPC 30D or 40D gasket optional when printed with TPU foam like Varioshore, beware of changing sizes mount…
The wheel need to be inserted into the boot and then the boot rotated onto the wheel.
I was having overheating issues with my Yardforce 500 Classic with a Vermut mainboard on the xESC motors. Since this mainboard has a 5V connector, everything was ready for a fan connection. The mount simply slides over the components and…
This 3D-printed mount is designed specifically for the YardForce Classic 500 when used with the OpenMower project. It provides a clean and secure way to attach an external WiFi antenna, improving connectivity and reception for your…
replacement for destroyed (dried out) front tyre Print Settings Supports: No Resolution: 0.6 mm nozzle Infill: 30% and 2 line walls Filament Material: TPU Notes: hard TPU for Ultimaker (bowden) type extruder Category: Replacement Parts
The dumper is reducing mower noise. It should be flexible enough. You may vary infill density to have adequate result. Second point is 5x10mm M6 nut. Each nut needs groves to fit unto damper housing. I glued the nuts with scratched facets…
Replacement tire for original YARDFORCE 500/500B 95A TPU printing Remove the old tire Break off the tabs Forceful
A holding bracket for a WiFi dongle and a speaker holder. I'm using this for my OpenMower build. I'm using this with the YardForce Classic 500. The WiFi dongle is not available anymore, the speaker is a Visaton K50 8 Ohms. You will need…
This wheel give to the YARDFORCE robot mower the capacity to clim slopes of 45° Print instructions big print, more then 24 h, I needed to place a cooler on the extruder motor , important no support for printing I used ngen orange 1.75 mm
This container fits in the wheels of the Yardforce Classic 500 and can hold lead balls to weigh down the mower for better traction. The project is inspired by CSobels ( https://www.printables.com/de/@CSobel_858331 ) contribution to the…
A Cover UI Plate, Speaker holder, GPS-SMA Plug, for my https://openmower.de/ build. Fit for YardForce SA600H (and similar models). Update 08/17/2023: If your main interest is the mount of your speaker, better check this alternative sound…
