1 / 2
OpenMower YardForce NX100i Ardusimple Helical GNSS Antenna Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
OpenMower YardForce NX100i Ardusimple Helical GNSS Antenna Mount
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 35
- Makes
- 0
- Views
- 321
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
OpenMower YardForce NX100i Ardusimple Helical GNSS Antenna Mount
- print with TPU / TPC for better flex and sealing
- TPU: shore 60-70D, TPC 30D or 40D
- gasket optional
- when printed with TPU foam like Varioshore, beware of changing sizes
- mount with 2x M5 screws. drill 3 holes (2 for screws, 1 center for antenna cable)
- mount the antenna first to the mount with 3x M2.5 screws. then attach the GPS cable from inside the the mower cover through your center hole and the printed mount.
- optionally use https://www.amazon.de/gp/product/B09PTYF16J for the antenna socket for better flexibility on connections/disconnections of an extension cable. The mount already has the needed spacing for it under the antenna piece