15 models
Case for Ardusimple simpleRTK2B with lid. Dimensions 75 x 75 mm. 3D printable file case made for SKU AS-STARTKIT-BASIC-L1L2-NH-02. Construction features: - 3x metal thread ready (M3 screws) supports for motherboard raised fixing - micro…
Notes: Phase offset 80mm from bottom of pole mount. Designed for m2.5 hardware. Use the (4 mounting hole) battery holder variant shown in pictures. There is a 2 mounting hole variant that will not fit because the terminals are in a…
This is a case for the ArduSimple simpleRTK2B board Category: Engineering
Notes: Phase offset 75mm from bottom of pole mount. Designed for m2.5 hardware. Use the (4 mounting hole) battery holder variant shown in pictures. There is a 2 mounting hole variant that will not fit because the terminals are in a…
Notes: Phase offset 100mm from bottom of pole mount. Designed for m2.5 hardware. Use the (4 mounting hole) battery holder variant shown in pictures. There is a 2 mounting hole variant that will not fit because the terminals are in a…
Simple small box for GPS RTK module - used for Vitulus robot , but could be usefull for anyone.
A basic case for the simpleRTK3B Pro, Long Range radio module, Shield for second xbee socket, and the bluetooth module. There are only holes for the main GPS lead, long range antenna, and the POWER+GPS USB connection. The main board…
This is a internal mount for an ArduSimple Survey GPS antenna mount for the Yardforce Classic 500 - the main mower of the OpenMower project ( https://github.com/ClemensElflein/OpenMower ). My chassi is six month older as the one from…
Simple case for the Ardusimple RTK2B Pro board, no internal battery. Holes are included with the intent to use them as light guides for internal LEDs. They should work with typical 1.75mm transparent PETG. Both top and bottom USB C ports…
OpenMower YardForce NX100i Ardusimple Helical GNSS Antenna Mount print with TPU / TPC for better flex and sealing TPU: shore 60-70D, TPC 30D or 40D gasket optional when printed with TPU foam like Varioshore, beware of changing sizes mount…
This is a mount for ardusimple uBlox RTK GPS modul for the open mower project. Fits in a YardForce classic 500 mower. You can also mount the long range xBee sender. Use M3 screws and nuts for the PCB Use M4 screws for mounting to case…
I use these mounts to hold the antenna for the radio link to the GPS RTK base station in place. The two parts are slightly different in terms of the mounting holes and diameters for the antenna. I printed them in PLA, but perhaps PETG,…
These brackets are intended to prevent the ArduSimple receiver board together with the Xbee radio module from shaking loose from the OpenMower mainboard over time. I use them for two month now (during summer) and they work very well so…
A basic case for the simpleRTK3B Pro, Long Range radio module, Shield for second xbee socket, and the bluetooth module. There are only holes for the main GPS lead, long range antenna, and the POWER+GPS USB connection. The main board…
OpenMower YardForce NX100i Ardusimple Helical GNSS Antenna Mount print with TPU / TPC for better flex and sealing TPU: shore 60-70D, TPC 30D or 40D gasket optional when printed with TPU foam like Varioshore, beware of changing sizes mount…
