1 / 2
Parametric eyepiece caps
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Customizable cap for telescope eyepieces
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Share Alike
Parametric OpenSCAD-script for telescope eyepieces.
PETG or even PLA should be fine. I'd recommend a diameter 1.5 mm greater than actual eyepiece and 3 to 5 bumps that, if needed, can be sanded down to get a good fit.
I've provided .stl files for the eyepieces in the main photo. They are made to be printed using a 0.4 nozzle at 0.20 layers with 0.45 extrusion width, which should make for just four continous walls.
