Macbook stand - universal size
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple macbook stand printed in one day. Universal size for most laptops on the market.
- Rating
- 5 / 5
- Likes
- 58
- Downloads
- 233
- Makes
- 2
- Views
- 2,508
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple macbook stand printed in one day.
Universal size for most laptops on the market.
Very simple printing.
I recommend printing the middle with a resolution of 0.15mm, L and R at 0.20mm.
For supports, see gcode (supports are very easy to separate).
Center for notebooks up to a thickness of about 14-22mm print file S.stl.
For thicker laptops than approx. 22 mm, print the S_22mm+.stl file.
For thinner laptops than approx. 14 mm, print the S_ultraslim.stl.
All centers can be easily extended to the desired width.
As protection, it is best to use the following ikea pads:
https://www.ikea.com/cz/cs/p/fixa-sada-sam-chranicu-na-podlahu-20-ks-seda-00431151/