Asus ZenWifi Mesh (e.g. BT6 BT10) Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wall mount for the Asus ZenWifi mesh point devices with access to buttons and cable feeds.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 127
- Makes
- 0
- Views
- 663
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Share Alike
For mounting your Asus ZenWifi devices on a wall. Open bottom for button access and cable feeds in rear for power and LAN/WAN cabling. The proximity to the wall requires angled ethernet cables. As seen in the images with a BT10 unit and the power cable is probably adding to pushing the unit a bit from the wall adding to some dangling/wobbliness.
Settings for the print displayed in these images:
PETG
Layer height: 0.2mm
Vertical shells: 2
Horizontal shells: 5 (top/bottom)
Infill: 30% gyroid
Supports: Automatic (for the screw holes)
Asus BT6 ZenWifi Mesh Wall Mount
by AllablurB is licensed under the Creative Commons - Attribution - Share Alike license.
