Carrera Wireless+ Handle for Slot Cars
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement handles for Carrera Wireless+ slot car system.
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 305
- Makes
- 0
- Views
- 2,323
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had an issue where my original handles started decomposing and cracking, so I wanted to have something to replace them. One additional benefit is now I can full color code them to match my race management software.
To print:
- 1x handle_tops (0.1mm resolution)
- 1x handle_bottoms (0.2mm resolution)
- 4x handle_pin (0.2mm resolution)
- These may need to be scaled depending on your printer
I tried to make the files in the correct orientation so you shouldn't need any supports. I printed this in various PLA colors. You may try to print the tops in softer TPU if you're trying to achieve the feel of the OEM handles.
Assembly:
The 4 pins provide way to line up the top and bottoms when gluing them together. They are not necessary if you can't seem to find a fit.
The handles should snap into the original controllers. The tabs on the edges of handle_bottoms might break a little, but it should ensure they snap into place.