Ultra-Low Profile 90-Degree IEC C13 Plug (SFF Optimized)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom 90° C13 plug. Requires donor contacts from a AC-18 connector (bent it 90°). Ideal for SFF & 8.4L Modcase builds.
- Rating
- 0 / 5
- Likes
- 3
- Makes
- 0
- Views
- 334
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Commercial Use - No Derivative
Ultra-Low Profile 90-Degree IEC C13 Plug
Designed to solve extreme clearance issues in SFF (Small Form Factor) PC builds. This custom housing allows for a C13 power connection in spaces where even "slim" retail 90-degree adapters fail to fit—perfect for the 8.4L Modcase and similar high-density projects.
🛠 Assembly Requirements & BOM
To ensure electrical reliability, this design utilizes high-quality internal contacts from off-the-shelf components rather than DIY metalwork.
Donor Part: 1x AC-18 (or equivalent) straight IEC C13 rewirable connector.
Modification: Extract the internal metal terminals from the AC-18 donor shell. Carefully bend them 90 degrees to seat into the precision-engineered channels of this printed housing.
Wire Compatibility: Optimized for 18AWG or 1.0mm² flexible silicone wire to allow for tight radius routing within the shell.
🖨 Printing Recommendations
Material: ASA or ABS is mandatory for heat resistance and durability. Do not use PLA.
Wall Loops: 4+ (Ensures internal terminal dividers are solid and structurally sound).
Layer Height: 0.16mm - 0.2mm for accurate internal tolerances.
Supports: Minimal supports may be needed depending on your orientation; ensure channels remain clear of debris.
⚠ Electrical Safety Warning
This is a high-voltage (110V-240V) component. By downloading and using these files, you acknowledge the following:
You possess the technical expertise to safely assemble, solder, and insulate mains electrical components.
Improper assembly can lead to short circuits, fire, or electrical shock.
Use at your own risk. The designer assumes no liability for damages resulting from the use of this 3D-printed component.