1 / 9
Ultra-Low Profile 90-Degree IEC C13 Plug (SFF Optimized) — zdjęcie 1
1 / 9

Ultra-Low Profile 90-Degree IEC C13 Plug (SFF Optimized)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Custom 90° C13 plug. Requires donor contacts from a AC-18 connector (bent it 90°). Ideal for SFF & 8.4L Modcase builds.

Ocena
0 / 5
Polubienia
3
Wydruki
0
Wyświetlenia
329
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Commercial Use - No Derivative

Ultra-Low Profile 90-Degree IEC C13 Plug

Designed to solve extreme clearance issues in SFF (Small Form Factor) PC builds. This custom housing allows for a C13 power connection in spaces where even "slim" retail 90-degree adapters fail to fit—perfect for the 8.4L Modcase and similar high-density projects.


🛠 Assembly Requirements & BOM

To ensure electrical reliability, this design utilizes high-quality internal contacts from off-the-shelf components rather than DIY metalwork.

  • Donor Part: 1x AC-18 (or equivalent) straight IEC C13 rewirable connector.

  • Modification: Extract the internal metal terminals from the AC-18 donor shell. Carefully bend them 90 degrees to seat into the precision-engineered channels of this printed housing.

  • Wire Compatibility: Optimized for 18AWG or 1.0mm² flexible silicone wire to allow for tight radius routing within the shell.

🖨 Printing Recommendations

  • Material: ASA or ABS is mandatory for heat resistance and durability. Do not use PLA.

  • Wall Loops: 4+ (Ensures internal terminal dividers are solid and structurally sound).

  • Layer Height: 0.16mm - 0.2mm for accurate internal tolerances.

  • Supports: Minimal supports may be needed depending on your orientation; ensure channels remain clear of debris.

⚠ Electrical Safety Warning

This is a high-voltage (110V-240V) component. By downloading and using these files, you acknowledge the following:

  • You possess the technical expertise to safely assemble, solder, and insulate mains electrical components.

  • Improper assembly can lead to short circuits, fire, or electrical shock.

  • Use at your own risk. The designer assumes no liability for damages resulting from the use of this 3D-printed component.

Tagi