command strip wall mount for Dreo Smart Wall Heater
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
simple wall mounts for the Dreo Smart Wall Heater that uses command strips
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — NoDerivatives
simple wall mounts for the Dreo Smart Wall Heater that uses command strips
I hightly reccomend prining in abs/asa, and using the 5lbs capacty command strips 2 per mount. giving the command strips at least a few hours to cure. for a level placment you can use the included bubble level on top of the heater with the mounts installed and place against wall so adhesive sticks in place then remove the heater and press mounts firmly so strips grab properly then let cure before replacing heater on mounts.
a amazon link for the command strips is provided below
use at least 2 top and 1 bottom mount (you can use 2 for extra security.
https://www.amazon.com/dp/B0751VFF2P?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
please dissregard the dirty wall in pics as this is my workshop