Ssx23 / MK23 Carbine Kit v3 (fixed)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
Longest piece is 270mm.
Please print for others but do not make money from that design.
need M4 screws and nuts for assemble, also 1 m3 on top.
Pistol will fit very snug, therefore, please print 100,3%
Supports need on body screw holes and for picatinny rail on lower module.
I printed from ASA, but should wok fine with PLA etc.
Please print with no less than 3 perimeter shell, don't want it break like other
printed kits, what ppl selling.
Infill: aprox 35%
Probably need some fine sanding on pixatinny, to fit grip etc.
those measur are approx. because i cutted them as they were too long:
Buffertube m4x65
butt adapter:
m4x58 m4x54
Center m5x50
Front m4x45 (2 screws)
M3x60
And some m3x12 to secure rail part
I grinded them afterward so you should do same.
Please post your makes and enjoy the file!
https://www.thingiverse.com/thing:2851954/comments =original link, file is partially corrupted on there