Destiny 2 Drang - Alone, to be Joined
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Features a moving slide, articulating trigger, removable magazine with button. Sized to fit comfortably in your hand
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 134
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An ornamented version of Drang, from Destiny 2.
Disclaimer: this model is a prop gun that does not shoot anything
Please refer to the original model for hardware, printing, and assembly instructions:
Extra Hardware: In addition to what is needed for the original model, you will also need:
2x 8-32 x 0.25-0.375" FHCS screws, similar to McMaster-Carr 91253A192
Extra Assembly Instructions:
First follow the original assembly instructions.
Insert the two extra 8-32 FHCS screws into the holes in the receiver. They should screw in with a small amount of resistance without needing the holes to be tapped. These screws are only cosmetic. Do not overtighten.
Glue the receiver panels onto the sides of the receiver. Use the bump on the inner side to guide alignment.
Slide the barrel shroud over the barrel, and secure it with some glue.
