DIY All-Around Silicone Sock for E3D Revo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mold to make your own silicone sock for Revo nozzles.
- Rating
- 4.923 / 5
- Likes
- 121
- Downloads
- 332
- Makes
- 13
- Views
- 3,359
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Make your own DIY all-around silicone sock for Revo nozzles.
NOTE: ONLY USE SUITABLE, HIGH-TEMPERATURE SILICONE!
Variant 1: Two-Part Silicone
Pour the bottom of the mold ⅔ full with silicone (~0.5ml) and screw it together until the silicone comes out of the top holes.
Varian 2: High-Temperature Silicone sealant
Soak the mold in detergent water. Fill the lower part of the mold ⅔ with silicone, screw together and let it settle in a warm place for 24h minimum. After de-molding let it cure for another 24h.
Update 2022/03/25: Increased the size of the vent holes. Added the STP files.