1 / 1
Axminster woodturning chuck jaw holder — image 1

Axminster woodturning chuck jaw holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Store chuck jaws neatly with this custom fit chuck jaw holder

Rating
0 / 5
Likes
1
Downloads
15
Makes
0
Views
117
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution

I have two sets of jaws for my woodturning chuck, and this print is a way to store the set that is not in use.

The design makes room for small magnets beneath each screw, to hold the jaws in place.
I used 4x1mm magnets. You will need 16 of them, one for each screw.

Based on your filament, you might have to adjust the parameters in the scad-file to make a tight fit.
I tried to make all measurements of parts exact, and then add secondary parameters to adjust for filament or slicer effects.

I use object() in the scad-file because, hey, why not, which might require a newer build and to enable the feature in OpenSCAD Features-settings.

Slicer settings:

  • Default settings should be ok, but you may adjust

  • Slicing tolerance: exclusive, because we want enough room for the jaws (or adjust margin in scad)

  • Top/bottom pattern: circluar, because this model is very circular

  • Infill: You shouldn't need any infill

  • Wall thickness and layer height: These are also parameteres in the scad, so adjust accordingly.
    I use wall thickness = 1.2, wall line count >=2, layer height = 0.2

My jaws are SK100 Dovetail Jaws Type C and SK80 Dovetail Jaws Type C

Tags