1 / 14
Platzsparende stapelbare Tische mit Socken / Space-saving stackable tables with socks — image 1
1 / 14

Platzsparende stapelbare Tische mit Socken / Space-saving stackable tables with socks

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Platzsparende stapelbare Tische mit Socken / Space-saving stackable tables with socks

Rating
0 / 5
Likes
1
Downloads
8
Makes
0
Views
47
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Stapeltische

Die Tische habe ich mir fürs Schießen als Erhöhung gemacht. Die lassen sich aber sicherlich auch für ganz andere Dinge gut verwenden. Bei den Tischen geht es darum, wenig Platz beim Transport einzunehmen, aber zusammengesetzt eine gute Höhe zu erreichen. Gerade b ei den 25m Disziplinen ist die Ablagefläche recht niedrig. Und bei der Bundesliga weiß man nie, wie hoch die Tische in der Halle sind. Daher wollte ich auch eine gewisse Variabilität, die durch das Zusammenstecken weniger oder aller Tische erreicht wird. Die beiden Klemmen halten die Tische zusammen, wenn diese untereinander gestapelt sind. Die klemmen haben eine breite und eine runde Erhebung, damit diese in die dreieckigen Aussparungen der Tische einrasten können. Das Muster ist nicht symmetrisch. Daher kann es sein, dass die Klemme nicht richtig passt. Dann muss entweder der oberste oder der unterste Tisch um 180 Grad gedreht werden, damit die Klemmen passen. Die Klemmen auf den Fotos sind noch eckig. Die Hochgeladenen haben eine Abrundung, die Die Klemmen in den gerenderten Bildern.

Die Tische haben jeweils eine Aussparung in der Tischfläche, in welche die Füße des nächstkleineren Tisches passen. Somit sitzen die Tische gut fixiert aufeinander. Für die Füße gibt es noch Socken, die leider nicht viel rutschfester sind als die nackten Füße. Vielleicht wird das mit weicherem Material besser. Ich hatte TPU 95A.

Drucken:

Material nach Wahl. Ebenso die Anzahl der Perimeter. Je nachdem, welche Belastung geplant ist. Für mich waren 3 Perimeter und 20% Gyroid Infill ausreichend. Ich will ja nicht da draufstehen. Sollte das jemand planen, dann auf eigene Gefahr. Ich bin mir nicht sicher, ob das gutgeht. Die Füße nach oben. Leider habe ich die Tische falsch herum in den STL Dateien. Diese müssen für den Druck um 180 Grad gedreht werden. Bei den Socken die Öffnung nach oben.

Die Socken sollten mit etwas flexiblem gedruckt werden. TPU/TPE... Man kann diese aber auch mit hartem Material drucken oder ganz weg lassen.

Von den Tischen wird jeweils einer benötigt. Von den Klemmen zwei und von den Socken vier. Oder mehr, wenn man mehrere Tische nebeneinander stellen will oder zu denen gehört, die immer wieder Kleinteile verlieren.

-----------------------------------------

Stackable Tables

I made these tables to use as risers for shooting. They could certainly be used for other things as well. The tables are designed to be compact for transport while still providing a good height when stacked. Especially in 25-meter disciplines, the tabels are quite low. And in the Bundesliga, you never know how high the tables in the hall will be. Therefore, I wanted some flexibility, which is achieved by connecting a few or all of the tables. The two clamps hold the tables together when they are put under each other for transport. The clamps have a wide and a rounded protrusion so they can snap into the triangular recesses in the tables. The design isn't symmetrical, so the clamp might not fit perfectly. In that case, either the top or bottom table needs to be rotated 180 degrees for the clamps to fit. The clamps in the photos have still rectangular edges. The ones I uploaded have rounded edges, which are shown in the rendered images.

Each table has a recess in the tabletop into which the feet of the next smaller table fit. This ensures the tables sit securely on top of each other. There are also "socks" for the feet, which unfortunately aren't much more slip-resistant than bare feet. Perhaps a softer material would improve this. I used TPU 95A.

Printing:

Choose your material. The number of perimeters depends on the intended load. For me, 3 perimeters and 20% gyroid infill were sufficient. The feet should face upwards. Unfortunately, the tables are upside down in the STL files. They need to be rotated 180 degrees for printing. For the socks, the opening should face upwards.

The socks should be printed with something flexible, like TPU/TPE. However, you can also print them with a rigid material or omit them entirely.

You'll need one of each table, two of the clamps, and four of the socks. Or more if you want to place several tables next to each other, or if you're one of those people who constantly lose small parts.

Tags