Dollhouse Lift (Výtah pro panenky)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Free-standing or attached crank-operated modular lift for your dollhouse.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 11
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
🏠 Modular Dollhouse Lift System
Add a working lift (elevator) to your dollhouse — fully modular, customizable, and easy to print!
This system lets you build a lift with as many floors as you like, spaced to match your own dollhouse.
🧩 System Overview
The lift is built from stackable printed frames and four wooden dowels (8 mm diameter) that act as vertical supports.
You can adjust both the height and number of floors simply by cutting the dowels to length and spacing the pass-through frames accordingly.
There are three frame types:
🟩 Bottom Frame – sits at the base and anchors the dowels. Best if paired with a passthrough frame just on top of it.
🟦 Passthrough Frame – one for each intermediate floor; slides on the dowels. Glue it in place in case it's too loose.
🟥 Top Frame – includes extra tooling for the crank mechanism.
The lift cage is printed separately in one piece and travels within the frame structure.
⚙ Assembly Instructions
Decide the height and number of floors you want.
Cut six wooden dowels (8 mm diameter) to match your planned lift height.
Cut another short piece of dowel for the crank-operated winch.
Slide the frames onto the dowels in order:
Bottom frame
One passthrough frame just on top of the bottom one
One or more passthrough frames for floors
The lift cage.
Top frame.
Adjust floor spacing to match your dollhouse levels.
Optionally secure the frames with a small drop of glue once aligned.
Install the crank in the top frame, and use a piece of string to connect the cage with the crank-operated winch.
That’s it — your lift is ready to play!
🧱 Compatibility
Optional glue-on clamps are included to attach the lift to the wooden dollhouse system sold by LIDL (available in different configurations over past years). You will note that the frame segments have small conical depressions on one side. The clamps for the LIDL system have matching cones, se that you can easily align the two parts together for glue-up. Make sure your frame segments all face the same way if you want to use the clamps. | ![]() |
|---|---|
The size of the lift is also optimal for Playmobil or Igráček characters. | |
🪵 Recommended Materials
Vertical supports: 8 mm wooden dowels (typically sold in 1 m lengths at hobby shops)
Alternatively print 8-mm rods on your 3D printer.
Printed parts: PLA or PETG
Adhesive (optional): for permanent assembly or attaching clamps
