QNAP NAS & Intel NUC Stack-Mount (TS-251+ / NUC 6th Gen) - Customizable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stable saddle mount to securely stack an Intel NUC on a QNAP NAS. Optimized for airflow and minimal height.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
Clean up your Home Lab! This saddle mount allows you to securely place your Intel NUC (6th Gen) directly on top of your QNAP TS-251+ NAS. The design features a "saddle" that clips onto the NAS, keeping the NUC stable without blocking necessary ventilation.
Key Features:
Low Profile: The connection block between the NAS and the NUC has been reduced to the absolute minimum (approx. 3mm) to keep the stack as compact as possible.
Secure Fit: Prevents the NUC from sliding off the NAS due to vibration or cables.
Airflow: Includes cutouts on the bottom and sides to prevent heat buildup between the devices.
Customizable: The included .scad file allows you to adjust dimensions if you have a different NAS width or NUC generation.
Compatibility:
NAS: Designed for QNAP TS-251+ (approx. 102mm width). Should fit other 2-Bay QNAP models with the same chassis dimensions.
PC: Designed for Intel NUC 6th Gen (approx. 115 x 111 mm).
Printing Instructions:
Supports: Required. Depending on your chosen orientation (upright vs. upside down), you will need supports for the saddle arch or the cable/ventilation cutouts.
Material: PETG is highly recommended. Since both the NUC and the NAS generate heat, standard PLA might deform under load. If you use PLA, ensure it is high-temp resistant (like Hyper-PLA) and monitor it.
Infill: 20-30% (e.g., Gyroid) for stability.
Perimeters: 3 walls recommended for stiffness.
Included Files:
.stl: Pre-sliced for QNAP TS-251+ & NUC 6th Gen.
.scad: OpenSCAD source code for customization.