Counting matching models…
This is a model for the Gigabyte GT 1030 (GV-N1030D5-2GL). This is specifically made for the QNAP TS-473A. I used a 0.2mm Nozzle with PETG. I recommend printing this model standing upright and using tree supports for the display output…
The only Qnap key model on this site wasn't working for me. Dimensions were right, but my Qnap lock has a protrusion on the corner. Thus, I updated it to accommodate that protrusion. When printed using 0.4mm nozzle, the key looks like it…
I lost my QNAP NAS key a while back, so I threw together a quick one to get the job done.
I've included 3mf and stl. I've included a Fusion 360 export, should you need to edit the model. A year or so ago, I was having problems with my QNAP TS-563. I needed to get things back up and running so when my troubleshooting was…
Bracket to mount a Supermicro AOC-STGN-i2S PCIe card into most QNAP NAS devices
10 inch Rack Mount for QNAP Switch Model QSW-2104-2S and QSW-1105-5T. It's a snug fit, so you have to press it in. Serverrack in the Photo is Skeleten 10" Rack, can highly recommend it's build like a brick.…
Wall mount holder for any 1-bay NAS.
Replacement full height / long PCIe bracket mount for QNAP Dual Port 10GbE SFP NEC
A replacement key for QNAP NAS. Print with PETG or ABS and 100% infill.
This is a set of brackets to mount a QNAP QSW-M2116P-2T2S Ethernet switch in a Leviton 47605 Structured Media Enclosure . With a bit of work on the model in Fusion 360 you can probably adapt them to other network devices. You'll need to…
This is a wall or back of the desk mount for a QNAP 10G switch. I mount this on the back of the desk and slide the switch into it. It sticks out a bit, but there's plenty of airflow to keep things cool, and it gets things out of the way.…
A rack shelf for your QNAP switch. I hesitate to call this a "rack mount" because it's just a shelf - not a hard mount. But it works more than well enough for me. Pictured mounted on my LACKRACK. Also holds the power brick and has a…
Intro This was inspired by the models created by @OloDeepdelver. I have a bunch of dead QNAPs (thanks to the Intel/LPC bug) so I designed a model to reuse the QNAP drive caddies that I already have. I plan to make a 3U version but it's…
I own a DeskPi T1 10-inch rack and needed to mount a QNAP QSW-3216R -8S8T 10 gig network switch inside it. After searching online without success for compatible brackets, I decided to replicate the original bracket designed for a standard…
A 2 bay QNAP NAS bracket for the QXP-W6-AX200 Wi-Fi card
I created this bracket for an ICYBOX PCIe NVMe SSD adapter card to be hold in an QNAP NAS that need flatbracket. V1 - One for selfcut threads and one for inserts (M3). V2 - New designed, fits better for a friend. (melting M3 inserts only)…
Sturdy angles for mounting a QNAP QSW-M2108R-2C switch in a 10” rack. Takes 1 U of space.
A quick design to hold a QNAP QNA-T310G1S or QNA-T310G1T ( https://www.qnap.com/en/product/qna-t310g1s or https://www.qnap.com/en/product/qna-t310g1t ) on a Skadis panel. It uses the Universal Hook…
Just a remix for 1 ported supermicro sfp+ card for qnap instead of 2 ;) Creds goes to @MrJackson for the first version with 2 ports.
Support to fix QNAP switch under a desk, an IKEA LACK or anything else
Store your Qnap TS 653d NAS in a tight space and connect fans to an external 100mm pipe
I run Intel NUC's in my server rack for my virtualization. I wanted a way to properly hold the QNAP thunderbolt to 10gbe SFP adapters rather than just resting them on top of the NUC. The print can hold the adapter in any direction…
19 inch rack anti-sag bracket for QNAP TL-R400S Print the bracket on the side. You need two brackets, one of them mirrored in the y-axis in the slicer. No support material needed. Included is the f3d file
Der QNAP TS-431 war einige Wochen lang in ihrer Standardausstattung ganz normal in Betrieb - ständig war eine wechselnde Temperatur zwischen 35 - 50 °C. Mit den zwei Lüftungsschlitzen in meinem Fall (je nachdem, wie viele Slots frei sind)…
Clean up your Home Lab! This saddle mount allows you to securely place your Intel NUC (6th Gen) directly on top of your QNAP TS-251+ NAS. The design features a "saddle" that clips onto the NAS, keeping the NUC stable without blocking…
Made adapters for NORCO RL-20 1U sliding rails. Fits perfectly. Downside that rails are too short and for maintenance I need to slide server fully out. For each side you need to print one front and one rear peace. Rails:…
10inch Mini Rack mount for a QSW-M2106PR-2S2T. 4mm thick for back heavy QNAP switches. I printed this in ABS for durability bit it will likey work better in PETG or even PLA (watch out for how hot your room where your rack is at), 4 wall…
Motivation [ compact wall mount for NAS ] As a NAS always generates some minor noises, I wanted to store it "away" with a compact wall mount. This also allows to "hide" the NAS and place it in a protected position on the wall. The struts…
A stand for my NAS. It consists of a base and legs that simply slide into the holes; I’ll also attach some soft felt to the bottom of the legs so that vibrations aren’t transferred to the shelf where the NAS is stored. The dimensions of…
10inch Mini Rack mount for a QSW-M2106PR-2S2T. 4mm thick for back heavy QNAP switches. I printed this in ABS for durability bit it will likey work better in PETG or even PLA (watch out for how hot your room where your rack is at), 4 wall…
Store your Qnap TS 653d NAS in a tight space and connect fans to an external 100mm pipe
Mounting the QNAP TL-R400S and other shallow depth equipment from QNAP with the provided rack ears leaves the device sagging, previously I used a tower of bricks to hold it up right but no more! The generic bracket made by Thingiverse…
Made a QNAP adapter for MERCUSYS MA310E 2.5Gb card that works well in QNAP at €12 cost
I got this device with no PSU's and a new one is 250 a piece, i saw that it had an ATX connector and installed a normal 90x50 PSU in it, should fit various models…
19" Rackmount for QNAP 10Gbit Switch Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: Yes Supports: Yes Resolution: 200 Infill: 60 Filament: 3D Jake PLA Category: Electronics
